Pond Pump

Additional Pond Pump Information

Once you have decided on which type of filtration system you want to use in your garden pond, you will need to choose a good quality pond pump to provide the silent propulsion to your filtration system. Pond pumps provide the power that pressurizes the flow of water in your filters, waterfalls, and fountains. When it is routinely time to clean your pond, a pump will help you drain the water easily and quickly. Some pond pumps come equipped with screens or pre-filters that help to block debris from clogging the pump. If your pond pump does not come equipped with a pre-filter, you can purchase them separately.

Underwater and submersible pumps are available in all different sizes. What you will need is based upon the volume of water in your garden water feature. An easy way to calculate the volume is to take a water meter reading before you start to fill your garden pond. Fill your pond and then take another water meter reading. Most water meters measure the amount used in cubic feet. You can convert this reading into gallons by multiplying your reading by 7.5.

When shopping for your pond pump, there are some key factors to look for that will make it easier for you to choose what would be best to use in your garden pond.

1. The power usage, which is measured in watts, can be found as low as 5 watts up to several hundred watts. You will want to compare how much energy will be used for the size that you will actually need.
2. The pump flow, which is measure in gallons per hour, will be determined by its discharge or at the height of the waterfall.
3. The pump head is the vertical distance that the pump will deliver water. When adding a fountain or waterfall you will want to make sure that your pump has enough lift to operate it.
4. The inlet is the opening that brings the water into the pump. The inlet size is based upon the interior diameter.
5. The outlet is the opening where the water is discharged.The outlet usually has a smaller opening than the inlet.
6. The cord length needs to be long enough to reach the GFCI outlet which should be about six feet away from your water feature if possible. If you have to use an extension cord you will want to verify that it is for outdoor use.

All this information is made easy in our selection located at graystonecreations.com. This will eliminate time and guesswork that you would like to be easy and accessible.